What Kind of Paint to Use on Rubber Backed Chairs

I'm a big fan of DIY projects that have a pretty quick transformation.

Spray painting outdoor furniture is a very budget-friendly DIY project that can make a pretty big transformation for an outdoor space without a big investment.

This article contains affiliate links.

I decided that the old extra white plastic chairs in our backyard were perfect to experiment with.

The chairs already looked really bad before I started the painting project and they weren't expensive. So there wasn't big a financial risk beyond a can of spray paint.

Spray Paint for Plastic Chairs

I choose the 2X Ultra Cover Gloss Spray by Rust-oleum after some online research because it included the primer and paint in one can.

I'm all about reducing the steps with quicker results.

This type of spray paint can be used on plastic, wood, and metal.

My color choice was "Oasis Blue" because I wanted something bright and beachy.

I love bright colors and my favorite color is blue, which will be even more evident once you see my other painting projects.

Steps for Painting a Plastic Chair

• The first thing that I did was clean the plastic chairs. I just used soap and water and then dried them with a towel afterward.
• Next, I placed the chair on a tarp before spraying.
• Make sure that you choose your project on a sunny day without much wind or you will waste a lot of your paint.
• The manufacturer recommends that you spray 2 or more light coats a few minutes apart.
• You'll want to shake the can throughout the painting process.
• Spray the chair continuously from 10-16 inches from the surface when you spray with a back and forth motion.
• You'll use 1 can per chair. I recommend ordering extra so that you can easily do touchups if you need to.

• When the chair was dry I flipped it over so that I could easily spray the underside while applying the additional coats.
• You'll need to allow more time for drying in cooler temperatures
• The paint typically drys in about 20 minutes

Spray Paint a Plastic Lounger Chair

After I successfully painted the plastic chairs, I decided to paint the old white plastic lounge chair. The lounge chair had also lost its' luster and needed some new life.

I cleaned the lounger prior to applying the paint but you really can't tell because the texture of the lounge chair was no longer smooth.

For the color, I opted again for "Oasis Blue."  I had to apply several coats on the lounger because it needed the extra coverage for the porous sections.

Once again the outcome was WAY better than what it looked like before.

After I had success with the old plastic chairs, I decided to also spray paint the plastic Adirondack chairs on my front porch.

They were a tan color and pretty bland.

I had more confidence in my spray painting ability because of the results from the other plastic chairs. That gave me the confidence that the plastic Adirondack chairs would also turn out ok too.

Spray Painting Plastic Adirondack Chairs

I applied the same method for the Adirondack Chairs that I used for the other plastic chairs. Once again I opted for the Rust-oleum Painter's Touch 2X Ultra cover paint + primer Gloss in "Brilliant Blue" and "Meadow Green."

It's important that you turn the chair over so that you can easily paint the backside too. I applied a few coats of paint for each chair and loved the final results.

Meadow Green

"Brilliant Blue"

I ended up painting 2 Adirondack chairs in each of the colors. I loved that my inspiration pillows looked great with both colors.

Steps for Painting a Metal Table/ Outdoor Furniture

• If you have rust on your metal table or outdoor furniture, you will want to sand the furniture first with a wire brush or sandpaper.
• Next, you want to clean and dry the table.
• Place the table on a tarp and shake the can before applying the first coat of paint. (I recommend wearing gloves so that your finger doesn't get spray paint on it)
• After my first coat dried, I flipped the table over so that it was easier to spray paint the legs.
• You'll want to shake the can throughout the painting process.
• The brand recommends spraying 2 or more light coats a few minutes apart.
• Spray the table with a back and forth motion from 10-16 inches from the surface when you spray
• If you are painting a fire pit or a grill you will want to use the high heat spray paint instead.

Painting Projects Before and After

My first metal project was a footstool. It so looked horrible so I had little risk. I had to sand it first, clean it and then I ended up painting it "Oasis Blue."

I like to start with smaller projects and then work my way up to the bigger ones to build a little more confidence.

For my metal table, umbrella stand, and plant rack I originally used the "Deep Blue" Gloss.

I had two cans of paint and found that I needed more. I had extra cans of the Brillant Blue and ended up creating more of an ombre with both colors.

The spray paint comes in 12 oz. cans and it doesn't hurt to buy extra so that you don't have to go back to the store to complete your project.

The best part about completing these painting projects was the inspiration to reenvision the spaces.

These projects had previously been a low priority of mine because I typically prefer traveling over staying home.

I love that I now have fun colorful outdoor furniture in my backyard and my front porch. I added a few colorful outdoor pillows, table umbrella, decor that I had inside, and I also painted a few pots.

You also probably noticed that my flower pots are empty in the picture. Learning how to keep herbs and flowers alive will be next on my list. Stay tuned.

Save this article for later. Pin the image below>>

Reader Interactions

What Kind of Paint to Use on Rubber Backed Chairs

Source: https://adventuremomblog.com/how-to-spray-paint-plastic-chairs-and-outdoor-furniture/

Share this post